landscape lightingChoosing a Landscape Lighting Installer in San Diego
Anthony Criss · November 21, 2026
Key takeaways
Look up the installer's license on the CSLB site and confirm the classification fits the work being sold.
A down payment should be no more than 10% of the price or $1,000, whichever is less.
Ask who handles any 120V work and who pulls permits, because 4S Ranch and Rancho Bernardo answer to different agencies.
A good bid lists fixtures, transformer size, zones, and a payment schedule tied to finished work.
Plan lighting alongside patios, walls and fire pits so wire and conduit go in before the stone.
Hire a landscape lighting installer whose CSLB license is active and fits the work, who gives you an itemized written bid, and who asks for no more than 10% down or $1,000, whichever is less. Ask who does any electrical work on the 120V side, and in 4S Ranch get HOA approval before anything goes in the ground.
The steps below apply across North County, and they matter most in 4S Ranch and Rancho Bernardo, which sit side by side but follow different rules. We install outdoor lighting alongside patios, walls and fire pits, so we've seen what separates a system that lasts from one that gets redone. Our outdoor lighting service page covers what we do.
Step 1: Check the license before anything else
California law requires a license for work of $1,000 or more in labor and materials, and for any project that needs a permit or workers, according to the CSLB's 2025 consumer brochure. A lighting system for a backyard will almost always clear that bar.
A license number on a card or website doesn't prove the license is valid. The CSLB's contractor-finding guide says to check status online or call (800) 321-2752. Make sure the business name on the record matches the name on your contract and on the checks you write.
The record also shows bond and workers' comp status plus pending and prior legal actions, as CSLB's consumer guidance explains. Ask for the pocket license and a photo ID, and ask about workers' comp and general liability insurance. For more on this, see our guide to choosing a landscaping contractor in North County.
Then check the classification on the record against the work being sold. One license class is not permission for every trade, so confirm on the CSLB site which classifications cover landscape lighting and any new electrical circuits.
Step 2: Ask who does the electrical work
Most landscape lighting runs on low voltage, but it still needs a 120V source. Under the National Electrical Code, Article 411 covers lighting systems operating at 30 volts or less, and the outdoor receptacle that feeds the transformer should be GFCI-protected. A listed supply has a secondary of no more than 30V AC, and output is capped at 25 amps.
One secondary source says a C-10 electrical contractor can do low-voltage lighting work but a C-7 low-voltage contractor cannot do line-voltage work. Contractor Prep's C-10 guide lays out that split, but treat it as a starting point and verify it with the CSLB. Electricians working for a C-10 contractor also generally need state certification or apprentice status, per Getply's licensing overview.
Does the job need a new outlet or circuit, or can we use an existing GFCI outlet?
Who does that work, and under which license?
Who pulls the permit if one is needed?
Will the transformer be low-leakage? Older magnetic-core units can trip GFCIs, and the usual fix is a listed low-leakage transformer, according to Electrical Calc Pro.
placeholder
x
Sources
CONTRACTORS STATE LICENSE BOARD Department of Consumer Affairs — Contractors State License Board
How do I find the right licensed contractor? - CSLB - CA.gov — Contractors State License Board
What Seniors Should Know - CSLB — Contractors State License Board
How to Install Low Voltage Landscape Lighting: Wiring Guide - ExpertCE — ExpertCE
Theory of Low Voltage Transformers for Landscape Lighting - ExpertCE — ExpertCE
California C-10 Electrical Contractor License 2026: Requirements & Exams — Contractor Prep
California Electrician License: C-10 and DIR Certification — Getply
NEC Code Requirements for Combined Irrigation and Outdoor Li — Electrical Calc Pro